 2.5"
TFT high resolution LCD screen. Beautiful aluminum casing in metallic color.
1.25"
LCM display showing battery level, receiver sensitivity indicator,
alarm audio on/off and frequency reading during scanning.
Frequency
range to be scanned: 900MHz~2.7GHz, covering frequency of most wireless cams in the market.
Light weight, portable, operated by 4 x AA 1.5V batteries or the included 5V power supply.
The batteries last for about 3 hours.
The scanner can find wireless cam in NTSC, PAL, color or B/W. Auto
switching.
When a video signal is found, the running frequency reading on the LCD
display will stop showing the exact frequency reading. The cam scene that the watcher is seeing will be shown on the 2.5" LCD monitor
immediately. You may then identify the scene and locate the hidden
wireless cam. Multiple cams within the frequency range can be found.
The
whole scanning process takes about 20 seconds if no RF signal is
found. Scanning covers area up to 500 feet range (152 meters)
The
scanner may be used as a portable receiver to monitor any wireless
cam you may have installed.
Video
Output and Alarm Output jacks are provided on the scanner for
extended applications. Built-in speaker.
How it works
When you suspect there is hidden cam in the area, or you want to make sure that is no hidden cam
in the area, turn on the bug scanner and it will start to scan for cam within the range of 500 feet (152 meters) from where you
stand. If any cam is found, the scene that the cam is currently pointing at will be shown on the 2.5" LCD display. Push the
Smart Button on the scanner up or down once to lock the scene. Then you can easily locate the hidden cam. If you press the
Smart Button again, it will continue to scan for other cam in the area, if any. Note: the scanner cannot detect hard-wired
cam.
|
Packing contents: |
|
(1) |
A cam bug scanner with LCD displays |
| (2) |
Two screw-in stub
antennas |
| (3) |
An universal 5V regulated power supply |
| (4) |
A mini plug to RCA AV
cable (for video/alarm outputs) |
| (5) |
An earphone for
silent monitoring |
Specifications:
|
Performance Index |
Bug Scanner |
| Frequency
range covered |
900MHz ~ 2700MHz |
| Scanning |
auto/manual |
| Receiver
sensitivity settings |
L: -50dBm, ML: -55dBm, M: -60dBm, MH: -65dBM, H: 70dBm, UH<-70dBm
|
| Video
system |
NTSC/PAL (EIA/CCIR ) auto detect |
| Antenna |
Two screw-in omni-directional antennas
Antenna length: 5.5cm (2-1/8") and 8cm (3-1/8") |
| Power
consumption |
650mA max |
| Power
supply |
100~240VAC output 5V 1A |
| Battery |
4 x AA 1.5V batteries (3~5 hours) |
| Dimensions |
74(W) x 120(L) x 35(H) mm |
| Weight |
266 gm excl. batteries |
|
