mini LCD monitors
ufo cam
UFO camera
smoke detector cam
wireless camera
wireless camera
video receiver
video transmitters
high gain antennas

5.8GHz Wireless Night Vision Surveillance Camera

Annoyed by the radio interferences during wireless transmission? Why not step up in frequency and experience the increase in signal clarity with the 5.8GHz technology. 5.8 GHz frequency band is less trafficked than 2.4 GHz or other bands, and is therefore less prone to interference. 5.8 GHz offers better range, stability and far less chance of interception.

This is a turnkey wireless infrared surveillance camera for round the clock surveillance. The transmitter, the cam, the infrared lights and an auto-switch 100~240VAC regulated power supply are all built inside a aluminum weatherproof housing. No hassle for expensive and messy wiring. Through the built-in powerful 1,000 mW transmitter, video signal is sent wirelessly to the included receiver. You can then view the color video live or record it on a recorder, computer or other recording device.                        

                       

 

Weather-proof housing: A high quality color infrared CCD cam is built inside a weather-proof aluminum enclosure suitable for outdoor installation. Housing dimensions: 34(L) x 14(W) x 11.5(H) cm (13.4" x 5.5" x 4.5").

High resolution IR camera: High resolution 1/3" SONY super HAD 520 TV line CCD image sensor produces excellent color video in the day and automatically turns to B/W mode in the night.

Long range transmitter: The built-in 1,000 mW long range transmitter sends wirelessly color video to the remote receiver, which can be connected to TV, monitor, VCR, DVR, computer or other viewing/recording device.

Transmission range: The package comes with two high gain omni-directional antennas for the cam and the receiver. The antennas are detachable so that you may change to other high gain antennas if you need more range. Range may vary substantially depending on the actual operating environment. Line of sight range up to 1,000 feet (330 meters) using high gain omni-directional antennas of 12dBi or higher.  Longer distance up to 3 miles (5 km) can be achieved by using high gain directional antennas in a line of sight environment. For example, from a mountain top to another mountain top, from an outlying island to the seashore, from a building to another building across the street and so forth. AV signal can travel through some obstructions such as wall, partition, tree and so forth but in this case, the transmission distance will be reduced depending on the type, materials and the number of the obstructions in the transmission range.

Antenna: Two 5.8GHz 8dBi omni-directional antennas are included for the camera and the receiver. See more pictures here.

▲RECEIVER - Click to enlarge

Wireless receiver (picture on the right). Up to 16 cams represented by different channel numbers can be set up in one location without interference to one another. The included 16-channel receiver can monitor up to 16 cams. You may select on the receiver to display any one of the 16 channels at a time to view live video on your TV or other display device.

Interferences. The cam can effectively avoid radio interferences from 2.4GHz frequency band which is already crowded with applications such as microwave ovens, cordless phones, blue-tooth equipment, wireless LAN access points and so forth.

Night vision. The cam can operate in total darkness for distance up to 100 feet (30 meters). The built-in infrared LEDs turn on/off automatically when the light condition turns weak (when illumination is under 8 LUX).

Easy installation. Three simple steps to setup: (A) fix the wall mount to wall, tree, pole or so forth; (B) fix the cam to the wall mount and connect it to the AC power; and (C) connect the receiver to TV, monitor, computer or other display device. It's done.

Packing contents

  • A 5.8GHz 16-channel wireless cam in weatherproof CCTV aluminum housing
  • A 100~240VAC auto-switch regulated power supply has been built inside the housing
  • Antenna extension kit with magnetic base for the camera
  • A 5.8GHz 16-channel AV receiver
  • Bonus! Two 5.8GHz 8dBi omni-directional antennas
  • A RCA AV cable for the receiver
  • An universal regulated power supply for the receiver
  • A wall bracket adjustable for left/right and up/down positions

Specifications:

Video Transmitter (built-in)

Operating frequency 5645~5945 MHz
16 preset channels (in MHz) CH1: 5945; CH2: 5925; CH3: 5905; CH4: 5885; CH5: 5865; CH6: 5845; CH7: 5825; CH8: 5805;
CH9: 5785; CH10: 5765; CH11: 5745; CH12: 5725; CH13: 5705; CH14: 5685; CH15: 5665; CH16: 5645.
Channel selection PLL Synthesizer - set by 4 dip-switches
Modulation FM
Carrier frequency accuracy +/- 300KHz
RF output power 1W
Transmission range Up to 330 meters (1,000 feet) line of sight. Up to 5 km with high gain directional antennas in LOS environment.
RF connector type SMA-female
Antenna included 8 dBi omni-directional dipole antenna
Video input 1Vp-p / 75 ohm
Video standard NTSC or PAL depending on camera's video format
Power voltage/consumption DC12V / 0.7~1A
Operating temperature -20 ~ +80o C
Storage humidity under 95% RH

AV Receiver

Operating frequency 5645~5945 MHz
16 preset channels
(5645~5946 MHz)
CH1: 5945;  CH2: 5925;  CH3: 5905;  CH4: 5885;  CH5: 5865;  CH6: 5845;  CH7: 5825;
CH8: 5805;  CH9: 5785;  CH10: 5765;  CH11: 5745;  CH12: 5725; CH13: 5705;
CH14: 5685;  CH15: 5665;  CH16: 5645.
Channel selection PLL Synthesizer - set by 4 dip-switches
Demodulation FM
RF connector type SMA-female
Antenna included 8 dBi omni-directional dipole antenna
Input signal level range -85 ~ -10dBm
Video output signal level 1Vp-p. 75 ohm
Video frequency response 50Hz ~5.5MHz +/- 0.5 dB
Video S/N ratio 100KHz, 1Vp-p Sine Wave, 40 dB min
Video standard NTSC and PAL compatible
Video output frequency 50Hz ~ 20KHz
Audio output signal level 3Vp-p typ (+/- 0.2V)
Audio frequency response 50Hz ~ 20KHz  +/- 0.3dB
Sensitivity -80 dBm
Audio S/N ratio 50 dB typ (+/- 3dB)
Output RCA jack: video x 1 / audio x 2 (L/R)
Power voltage/consumption DC 12V /0.3A
Operating temperature -20 ~ +80o C
Dimensions/Weight 80 x 65 x 26 mm / 137 gm including antenna
Night Vision Camera
Image device 1/3" SONY color CCD
Resolution ratio Horizontal 520 TV lines
Illumination factor 0 LUX (LEDs ON) / 0.5 LUX at F2.0 (LED Off)
IR distance Up to 100 feet (30 meters)
IR wave length 850 nm
IR LEDs 32 units of Φ5 IR LEDs
IR status Power on automatically by CDS under 8 LUX
Video Output Standard NTSC: 768(H) x 494(V) / PAL: 752(H) x 582(V)
Video Output 1V-p-p 75 ohm
Lens Focus/Visual Angle 12 mm, 28o
Auto Electronic Shutter 1/60 ~ 1/100,000 second
S/N Ratio =>50 dB (AGC off)
Gamma correction 0.45
Other Functions Automatic exposure control, automatic gain control, automatic backlight compensation.
Dimensions/Weight (housing & contents) 34(L) x 14(W) x 11.5(H) cm (13.4" x 5.5" x 4.5") / 2 kg including antenna
view_cart

Price: US$429

Add an extra receiver at US$130?

Add a high gain 15dBi omni-directional antenna and/or a 23dBi directional panel antenna for the transmitter/receiver?

Add an extension cable for the antenna(s) ordered?
CABLE LENGTH: 

antenna

Home | What's New | Products | FAQs | Resources | Terms of Sale | Disclaimer | Contact Us
Copyright 2002-2013 VFM Store. All Rights Reserved.