|
|
||
|
|
|||
|
The directional panel antenna is most useful when it is desired to have the operational area in one general direction as opposed to all directions (omni-directional). It is designed to radiate / receive radio waves in one general direction, increasing the antenna's effectiveness in that direction. The beam width is much wider compared with a directional Yagi antenna's beam width, therefore precise antenna aiming and device positioning isn't necessary. (NOTE: Same as other directional antenna, it is not recommended to use if there are obstructions such as wall, building in the transmission path). The antenna is weatherproof and is therefore suitable for indoor as well as outdoor installation. The casing and connector are made of corrosion-resistant material to withstand harsh outdoor conditions. Suitable to use with video transmitter and/or receiver to improve gain for better coverage. 1.2GHz, 2.4GHz or 900MHz version is also available. |
| Model Number | ANTP5823 |
| Product description | directional panel antenna |
| Peak gain | 23 dbi |
| Frequency range | 5725~5850 MHz |
| Nominal impedance | 50 Ω |
| Polarization | vertical |
| Beamwidth - horizontal | 9° |
| Beamwidth - vertical | 9° |
| Power rating | ≥100W |
| VSWR | ≤1.5 |
| Front to back ratio | 25 dB |
| Bandwidth | 125 MHz |
| Connector type | N (female) |
| Connecting cable | not included |
| Mounting kit | U-bolt kit included for pole of diameter 4~5 cm |
| Application | for AV receiver or transmitter |
| Dimensions (H x W x D) | 30 x 30 x 2.6 cm (11.8" x 11.8" x 1") |
| Net weight | 1.2 kg (2.6 lb) |
| CAUTION: When installing the antenna outdoor, protective measures should be taken against lightning surges, for example, installing a lightning arrester. | |
Home | What's New | Products | FAQs | Resources | Terms of Sale | Disclaimer | Contact Us
Copyright © 2002-2012 VFM Store. All Rights Reserved.
