Panel antenna (dual band) for transmitter and receiver.

The directional panel antenna is most useful when it is desired to have the operational area in one general direction as opposed to all directions (omni-directional). It is designed to radiate / receive radio waves in one general direction, increasing the antenna's effectiveness in that direction. The beam width is much wider compared with a directional Yagi antenna's beam width, therefore precise antenna aiming and device positioning isn't necessary.

The antenna is weatherproof and is therefore suitable for indoor as well as outdoor installation. The casing and connector are made of corrosion-resistant material to withstand harsh outdoor conditions. Suitable to use with video transmitter and/or receiver to improve gain for better coverage. Suitable to use with video transmitter and/or receiver to improve gain for better coverage. 1.2GHz or 900MHz version is also available.

NOTE: Same as other directional antennas, it is not recommended to use if there are obstructions such as wall, building... in the transmission path.

Model Number	ANTP2411
Product description	directional panel antenna
Peak gain	11 dbi
Frequency range	Dual band: 800~960MHz / 1700~2500MHz
Nominal impedance	50 Ω
Polarization	vertical / horizontal
Horizontal beam width	≥55°
Vertical beam width	≥56°
Power rating	≥20W
Return loss	≤-10dB
Cable pigtail	30 cm (1') / connector type: N (F)
Mounting kit	pole mounting kit included
Application	for AV receiver or transmitter
Dimensions (H x W x D)	22 x 25 x 4.5 cm (8-5/8" x 9-3/4" x 1-3/4")
Weight	1.2 kg (2.2 lb)
CAUTION: When installing the antenna outdoor, protective measures should be taken against lightning surges, for example, installing a lightning arrester.

Panel Antenna (Dual Band)