1.2GHz Panel Antenna

panel antenna 

The directional panel antenna is most useful when it is desired to have the operational area in one general direction as opposed to all directions (omni-directional). It is designed to radiate / receive radio waves in one general direction, increasing the antenna's effectiveness in that direction.

The beam width is much wider compared with a directional Yagi antenna's beam width, therefore precise antenna aiming and device positioning isn't necessary. (NOTE: Same as other directional antenna, it is not recommended to use if there are obstructions such as wall, building in the transmission path). The antenna is weatherproof and is therefore suitable for indoor as well as outdoor installation. The casing and connector are made of corrosion-resistant material to withstand harsh outdoor conditions.

Suitable to use with video transmitter and/or receiver to improve gain for better coverage. 2.4GHz or 900MHz version is also available.

Model ANTP1209
Product Description 1.2GHz directional panel antenna
Peak gain 9dBi
Operating frequency 1060 ~ 1200 MHz
Impedance 50 Ω
Polarization vertical
Horizontal beamwidth ≥55°
Vertical beamwidth ≥56°
Power rating ≥20W
Return loss ≤-10dB
Lightning protection DC ground
Connector type N (F)
Connector cable not included
Mounting kit pole mounting kit included
Application for AV receiver or transmitter
Dimensions (H x W x D) 22 x 25 x 4.5 cm (8-5/8" x 9-3/4" x 1-3/4")
Weight 1.2 kg (2.2 lb)


1)    When running extension cable between the antenna and the transmitter (or the receiver), it should be kept as short as possible. It is not recommended to run cable beyond 10 meters (approx. 32 feet) to avoid excessive signal loss.

2)    Instead of using extension cable between the antenna/transmitter (or the antenna/receiver), you may extend the distance between the transmitter and the camera (or the receiver and the monitor) using high grade 75 ohm coaxial video cable such as RG6 cable. See an illustration here.

3)    Directional antenna can be used in combination with omni-directional antenna.

Price: US$70

Add an extension cable for the antenna(s) ordered?

Please select the connector type below for the extension cable. If you are not sure what connector type, leave it blank. Tell us in the Message Section on the next page that appear after clicking "CHECKOUT", whether you plan to connect the cable to the transmitter or the receiver?

This is a SSL secured site for online shopping

Pay securely with major credit card