2.4GHz Panel Antenna

The directional panel antenna is most useful when it is desired to have the operational area in one general direction as opposed to all directions (omni-directional). It is designed to radiate / receive radio waves in one general direction, increasing the antenna's effectiveness in that direction. The beam width is much wider compared with a directional Yagi antenna's beam width, therefore precise antenna aiming and device positioning isn't necessary.

The antenna is weatherproof and is therefore suitable for indoor as well as outdoor installation. The casing and connector are made of corrosion-resistant material to withstand harsh outdoor conditions. Suitable to use with video transmitter and/or receiver to improve gain for better coverage. Suitable to use with video transmitter and/or receiver to improve gain for better coverage. 1.2GHz or 900MHz version is also available.

NOTE: Same as other directional antennas, it is not recommended to use if there are obstructions such as wall, building... in the transmission path.

Model ANTP2414
Product Description directional panel antenna
Peak gain 14dBi
Operating frequency 1700~2500MHz
Impedance 50 Ω
Polarization vertical
Horizontal plane ≥110°
Vertical plane ≥45°
Power rating ≥20W
VSWR ≤1.5
Lightning protection DC ground
Connector type SMA-M or RSMA-M (with adapter)
Connector cable 1 meter (3.3") cable included
Mounting kit wall mount clip included
Application for AV receiver or transmitter
Dimensions (H x W x D) 18 x 21 x 4.5 cm (7.1" x 8.3" x 1.8")
Weight 0.4 kg (14 oz.)


1)    When running extension cable between the antenna and the transmitter (or the receiver), it should be kept as short as possible. It is not recommended to run cable beyond 10 meters (approx. 32 feet) to avoid excessive signal loss.

2)    Instead of using extension cable between the antenna/transmitter (or the antenna/receiver), you may extend the distance between the transmitter and the camera (or the receiver and the monitor) using high grade 75 ohm coaxial video cable such as RG6 cable.

3)    Directional antenna can be used in combination with omni-directional antenna.